Cementcoat
DIGO CEMENT COAT
Product: Cementcoat is a water-based solvent-free transparent coating on the basis of acrylics and special aggregates.
Specific use: Cementcoat is applied as a protective transparent coating over internal finishing on the basis of cement. It can also be used as a protective top layer over various other types of porous wall finishing.
Characteristics: Cementcoat is a transparent and solvent-free coating. Cementcoat is delivered ready for use and gives a light glow and deeper colours to the surface. The treated surface gets a water-repellent coating by using Cement Coat in multiple layers.
Method of application: Apply Cementcoat in thin layers with a sponge in such a way that an even surface is obtained. Thoroughly rub the Cementcoat with the sponge to obtain a stripe-free surface before the next layer is applied. Multiple layers (2 to 3) are necessary for a good result. The best result is obtained by applying multiple layers wet in wet. The applied layer of Cementcoat can also be dry before a next layer is applied.
Processing temperature:
Do not use at a surface and ambient temperature below + 10°C.
The drying time is dependent on temperature and degree of humidity.
Surface: The base must be free from debris, dry, clean and grease-free.
Consumption:
Dependent on the surface up to 0.05 litre per m2 per layer.
Determine the exact use by means of a test surface.
Packing/Contents: In buckets of 1, 2 and 5 litres.
Storage: Protect against heat and frost.
44 (7-2016)